Industrial Servo Voltage Stabilizer
We are a Manufacturer of Industrial Servo Voltage Stabilizer in Delhi and Supply all over India.
Voltage variation is a common phenomenon across the world, esp. in developing and under-developed nations. Voltage variation manifests in many different ways
- Low voltage or sages: sags might be due to undersized distribution lines, the connection of a large load to the network, ground faults, units located towards the end of a long supply line, etc
- High voltage or surges: surges might be generated by disconnection of large loads, increases in voltage, atmospheric events, units located close to the start of a supply line, etc.
- Unbalanced voltage: Phase-to-phase unbalancing in voltage is generally observed where multiple consumers draw power from a common distribution line or in remote locations far from the power grid.
- The duration of the above phenomena depends on the cause and is not easily predictable. Generally, voltage is low during the daytime and high during the night hours. Moreover, on holidays, peak hours, rainy days, and when the commercial/ agricultural load is switched off, the voltage rises quite sharply.
Benefits of Industrial Servo Voltage Stabilizer :
Let’s draw an analogy of the human body. Our body needs to maintain a
- The constant temperature of 98.4. F to work effectively. Even a minor increase
- Or decrees in body temperate can reduce our efficiency and can lead to further deterioration of
- Body parts.
Similarly, most electrical equipment requires a constant voltage supply of 400V to last longer & run efficiently. Electric Motors draw considerably high current at high / Low voltage, causing excessive power losses and resulting in their premature failure. Similarly, bulbs/ Tubes / Luminaries could consume up to 40% more power at high voltage and may last for more than 10% of their normal life.
The growing use of electrical and electronic equipment, requiring a near-constant voltage supply for efficient operation, makes line voltage regulation increasingly necessary and to finer limits. Operation.
The growing use of electrical and electronic operation makes line Automatic voltage regulation increasingly necessary and has finer limits. Operation.
Voltage variations can play havoc with electronic systems and even bring the whole plant to a grinding halt. Even though you may currently not be experiencing the negative effects of voltage variations, it doesn’t imply that your unit is free from that problem your supply may be full of variations, but none has yet been severe enough to trigger a shutdown. Your electrical gadgets may be exposed to significant risk, where a small increase in the severity of the voltage variations could cause crippling losses.
Who Needs a Stabilizer?
If your unit is suffering from low/high/unbalanced voltage, you need to install a stabilizer soon.
Industrial units having acute/ higher failure rates of electrical equipment such as builds, tubes, chokes, starters, contactor coils, motors, etc., should verify that it may be due to voltage variation (esp. high voltage). you may note down hourly readings of incoming voltage for a few days continuously., if you find that the input voltage is lower or higher than 230V (single ph) /400 (3-ph) even for a few hours a day, then you require a stabilizer. Call our engineer for free On-site Voltage Analysis.
Advantages of Automatic Voltage Controller (AVC) :
Spectron AVC resolves 99% of voltage problems automatically and ensures a steady voltage supply around the clock. Some key advantages of installing an AVC are:
- Up to 80% reduction in the Breakdown of Electrical Equipment
- Up to 30% savings in Electricity Costs
- Enhanced Productivity of plant
- Uniform Quality of End Product
- Reduction in MDI (Peak Demand)
- Improvement in power factor
- 80% Depreciations as per Income Tax Act in India
(Being an energy-saving device)
Capacity :
100 to 5000 K.V.A Saves Energy up to 30%
Reduces Breakdown by up to 80%
