Ht Automatic Voltage Regulator
HT Automatic Voltage Regulator is a distribution transformer with up to 5000 KVA capacity with an integral servo voltage regulator connected on the HT side of the transformer. its superior features not only help you to conserve energy but also avoid detrimental effects of overvoltage regulator voltage and unbalanced voltage on your
constructionally it consists of two interconnected tanks, one housing the distribution and buck-boost transformers and the other housing the servo voltage controller as shown in the single-line diagram.
In case there is a voltage fluctuation on the HT side the controller will move the carbon brushes on the dimmer unit to tap the equivalent of voltage to be on the HT side. This voltage would then be to the buck-boost transformer connected to the HT input of the Distribution transformer.
The buck-boost transformer will, in turn, add or subtract it from incoming HT voltage, so that HT voltage is always maintained at its set value. A bypass handle is offered to ensure the voltage control unit can be bypassed in case needed.
Incoming HT voltage, so that HT Voltage is always maintained at its set value a bypass handle is offered to ensure that the voltage control unit can be bypassed, in case needed.
The entire unit is designed as an outdoor, oil-cooled unit with a simple bypass system. This will ensure that the transformer continues to work uninterruptedly in the unlikely event of a breakdown in the Automatic Voltage Regulator unit.
Capacity: – 250 K.V.A to 5000 K.V.A
The market has lots of servo voltage stabilizer manufacturer companies available that make voltage regulators but every company cannot be the same or right. hence always be aware of these types of fake companies. Inquiry now our expert will call you soon!
